Document Actions
Keeping your Tux clean
Up to Table of ContentsThis FAQ applies to: Any version.
Over time the soft fur or "fogging skin"of Tux Droid tends to collect dust. So what is the best way to get my Tux clean? Here you will find the procedure. Warning! Does NOT require compiling or terminal commands of any kind.
First of all, in order to get rid of dust or stains do NOT use liquid solutions. Liquids are likely to damage the "fogging skin" and make stains on the white belly.
Ok then, so what is the good way to clean up your Tux?
The following is required:
- sticky-ware or some sort of adhesive tape
- manual labour
- dusty Tux
Cleaning procedure:
- Step 1: locate a dusty spot
- Step 2: apply adhesive tape
- Step 3: remove adhesive tape
Results and further action
Now you have done it! You have a clean spot ;) Meaning you will have to do the rest now too.
Just keep repeating the above procedure with a new piece of adhesive tape for every spot you do. And in no time your buddy will look as good as new again.