Hello,

I received today the droid tux, but I have a problem with upgrading the firmaware is always receive the same message:

davide@davide-laptop:~/tuxsetup-1.3.0013-rc1/mirror/opt/tuxdroid/firmware/tuxdroid-firmware-hex.0.4.0$ tuxup -a .
Programming ./fuxusb.hex in the USB CPU
Version 0.4.0
Validating...
7369 bytes used (44.98%)
[OK]

Programming ./tuxcore.hex in the core CPU
Version 0.4.0
Bootloading failed, program aborted at dongle reply.

I tried on several computers but always with ubuntu 7.10 ...

Do you have an idea? It broke tux droid?

Hello, Davide

Hey Davide,
Did you try to set your Dongle manually in bootloader mode ?

Hi, i try to install manually, but the result is the same:

davide@davide-laptop:~/tuxdroid-firmware-hex.0.3.1$ tuxup --all --pretend .
Programming ./fuxusb.hex in the USB CPU
Version 0.3.0

Programming ./tuxcore.hex in the core CPU
Version 0.3.1

Programming ./tuxcore.eep in core CPU

Programming ./tuxaudio.hex in the audio CPU
Version 0.3.1

Programming ./tuxaudio.eep in audio CPU

Programming ./fuxrf.hex in the fux (dongle) RF CPU
Version 0.3.0

Programming ./tuxrf.hex in the tux RF CPU
Version 0.3.0

davide@davide-laptop:~/tuxdroid-firmware-hex.0.3.1

davide@davide-laptop:~/tuxdroid-firmware-hex.0.3.1$ tuxup fuxusb.hex
Programming fuxusb.hex in the USB CPU
Version 0.3.0
Validating...
6839 bytes used (41.74%)
[OK]

Time elapsed:  9 seconds.
davide@davide-laptop:~/tuxdroid-firmware-hex.0.3.1$

avide@davide-laptop:~/tuxdroid-firmware-hex.0.3.1$ tuxup --all .
Programming ./fuxusb.hex in the USB CPU
Version 0.3.0
Validating...
6839 bytes used (41.74%)
[OK]

Programming ./tuxcore.hex in the core CPU
Version 0.3.1
Bootloading failed, program aborted at dongle reply.

davide@davide-laptop:~/tuxdroid-firmware-hex.0.3.1$ tuxup fuxrf.hex
Programming fuxrf.hex in the fux (dongle) RF CPU
Version 0.3.0
............................................................
 [OK]

Time elapsed:  7 seconds.

You know where is the problem? Because it seems that the Fish can program it, and the droid no tux! I
do not know that more tests done, I have tried both with version 1.2
that 1.3 ...

Are you sure your white cable is pugged both in TuxDoid and your Dongle and Tux is in programming mode?